RRP £99.99 – Black Friday Special Offer £34.99 !

5 1/4″ 13cm With Grill 150W Watt – Pair

FEATURES

– High Power Handling
– Extended Dynamic Range
– Silk Dome Tweeters For A Smooth Sound
– Polypropylene Woofer And Tough Rubber Surrounds
– Thin-Mount Design Easily Fits Behind Factory Grilles
– Grilles Included

These KSC coaxial speakers work best with 75 watts of recommended power.

SPECIFICATION

– Speaker Design – 2-Way
– Woofer – 5.25″ (130 mm)
– Tweeter – 3/4″ (20 mm)
– Rated Impedance – 4 Ohm
– Peak Power – 150 W
– RMS Power – 75 W
– Sensitivity – 90 dB 1W, 1m
– Frequency Response – 45-21k Hz
– Mounting Hole Diameter – 4 1/2″ (115 mm)
– Top Mount Depth 1 3/4″ (45 mm)
– Bottom Mount Depth 2″ (52 mm)
– Tweeter Protrusion – 1/4″ (6 mm)
– Grilles – Included
– Tweeter Magnet Material – Neodymium
– Tweeter Dome Material – Silk
– Tweeter Design – Balanced Dome
– Woofer Cone Material Polypropylene
– Woofer Surround Material – Rubber

This adapter allows an aftermarket head unit to be installed, whilst retaining the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.

Please Note:

• When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.
• Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.
• In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.
• The wire in particular on the new wiring harness will be the red wire.

This Pioneer AUX adapter cable provides 2 x RCA phono inputs and connects via the Pioneer CD changer input at the rear of compatible P-Series IP-Bus Pioneer after-market car stereos. This Pioneer aux adapter can connect the audio from external devices such as DVD players and games machines to compatible Pioneer head-units.

Please ensure your Pioneer car stereo is a ‘P Series’ model and has an IP-Bus CD changer connector at the rear.

PC7-101 Pioneer AUX lead adapter features
Pioneer AUX cable connects via Pioneer ‘P Series / IP-Bus’ CD changer port at rear of compatible radio.
Feed the audio from devices such as DVD players and games machines into your head-unit as an auxiliary input.
Gold plated connections for superior sound quality.
Provides a far superior sound quality compared to cheap FM modulators.
Approx 10 inches (26cm) in length.
Connect iPod, iPhones, iPads, MP3 players and mobile phones by using an optional RCA to 3.5mm mini-jack.
Very easy ‘plug n play’ installation
Autoleads part number – PC7-101 version of Pioneer CD-RB10 lead

This aerial extension cable for car radios and stereos allows you to extend the existing car aerial connection.

Non amplified models only Fakra to DIN Connection, required when replacing the Original radio with an Aftermarket unit.

Aerial Adaptor (DIN) suitable for the following Vehicles:

BMW 1 Series (2004 Onwards / E87)
BMW 3 Series (2001 to 2002 / E46)
BMW 3 Series (2005 to 2006 / E90/E91)
BMW 3 Series (2006 Onwards / E90/E91)
BMW 5 Series (2000 Onwards / E60/E61) Not LOGIC7
BMW 6 Series (2005 Onwards / E63/E64) Non Amp’d
BMW 7 Series (1994 to 2005 / E65/E66/E67) Not LOGIC7
BMW 7 Series (2005 Onwards / E68 Non-Amplified)
BMW Mini (2001 Onwards)
BMW M3 (2007 Onwards)
BMW X3 (2004 Onwards / E83)
BMW X5 (2000 Onwards / E53/E70) (Not LOGIC7)
BMW Z4 (2003 Onwards / E85/E86)
BMW Z8 (2000 to 2002 / E52)

If unsure please check the fitting on your car.